MrMario2011

Appreciate the time and attention on it I'm sure the application is fine, more of one of those instances where of course I'm the only person running into this! I went ahead and added you. No further troubleshooting needed at the moment since the console is now flashed and buttoned up, but I'll look forward to trying this again the next time I get my hands on a 1.6 console!

Hey hey! I can get you added, I take it your username is the same as on here, and you're in the XS Discord? Sorry for any added trouble here! Just sharing my experiences, I haven't fired up 0.51 but my testing was done on 0.50 yesterday. Admittedly I've buttoned up this console for now as I was looking to get this done prior to some other things grabbing my attention (totally not the Switch 2, nope, not at all), but I'll answer what I can: I was able to dump and flash the BIOS using the Python scripts. I was originally trying to dump just to verify connectivity, but after I successfully dumped with the Python script, I went back to the GUI tool with my exact same setup and couldn't get a connection. I used a super cheap CH340 for my adapter, purchased from here: https://www.aliexpress.us/item/2251832482551324.html For what it's worth, I also attempted to use @b3ncs1's recommendation for a Raspberry Pi Pico. No dice on that one. I tried both firmwares linked to the repository, made sure my wires were connected to the correct pins, different cables, etc. and that did not work for me with the scripts or the GUI tool. I attempted both Auto and manual options in the GUI tool. It would scan everything successfully, but no response each time. Those photos are my exact install as-is which worked, I did not have to remove or add any components.

Wanted to drop by at least and thank @Prehistoricman for the legendary development and release, as well as @OGXLABS for the GUI tool Wanted to try it all for myself, I can confirm the Python dumper script worked successfully! Just had to edit the COM value within the script itself. I tried the XycloModGUI tool multiple times but unfortunately each time I got "No response from Xyclops." for my error. I originally had this post saying that I couldn't get this to work, but if anyone is running into issues using the GUI tool, try with the Python scripts before writing this off. I'll attach some photos to show my work. Not perfect, but it works!

Haven't tried this yet, but amazing release to see! No intermediate step of softmodding needed will be super convenient after bridging necessary motherboard points. Again, thanks for your work on this and sharing

Really awesome way to give Cerbios a spin for softmodded consoles, has worked successfully on a couple I've tried it on. Pretty direct, simple to use, sleek setup. Thanks for your efforts putting this together and sharing it!